Free template

Supplier corrective action request (SCAR) template

Free supplier corrective action request (SCAR) template: fill in online, download a PDF and request an 8D from your supplier. With guidance and examples.

Written by , Head of Quality (AS/EN 9100)

Updated:

Ready immediatelyDownload at no cost
Editable filesAdapt it to your own process
Guidance includedGet practical notes on using it

Your entries are saved only in this browser. Nothing is sent anywhere until you choose to save to Suppliscore.

Request
To (supplier)
From (customer)
Part and delivery
Non-conformance
Requested actions

Track in Suppliscore

A supplier corrective action request (SCAR) formally tells a supplier that their product or service did not meet your requirements, and asks for containment, root cause analysis and corrective action, usually as an 8D report, by a set date. Fill in the template above and download it as a PDF ready to send. It runs in your browser; nothing is sent anywhere.

What a good SCAR contains

Section Why it matters
Reference and dates A SCAR number to track the case, and two deadlines: containment confirmation and 8D response
Supplier and your contact Who must act, and who answers questions
Part and delivery Part number, drawing revision, purchase order, lot or delivery note, quantities received and rejected: so the supplier can find the affected batch
Requirement vs. actual What the drawing or specification requires, and what you found: the core of the complaint
Evidence Photos, measurement report, returned samples
Severity and affected area How serious the problem is, and whether it concerns product quality, delivery or the quality system
Requested actions Containment of all stock, 8D report, sorting, replacement, cost compensation

The template marks what is still missing for a complete request (supplier, part number, description and response date).

When to issue a SCAR

Not every defect needs a formal request. Issue a SCAR when the problem is significant (it affected your product or customer, it is a safety or regulatory issue, or it repeats) or when you need the supplier to find and remove the root cause. For a minor one-off issue, record the non-conformance and inform the supplier informally.

Dates that work

Set two deadlines:

  • Containment confirmation: usually within 24 to 48 hours. The supplier confirms that suspect stock at their site and in transit is secured.
  • 8D response: the complete 8D including verified root causes and corrective actions, often within 2 to 4 weeks; the validation of effectiveness may follow later.

Agree on the deadlines in your quality agreement with the supplier, so a SCAR does not start a discussion about timing.

A practical rule is to set both deadlines by severity, with the same scheme as the 8D guide:

Severity Containment confirmed Root cause Closed 8D
Critical 24 hours 5 working days 30 days
Major 48 hours 10 working days 30–60 days
Minor 5 working days 15 working days 60 days

Write the dates on the SCAR itself, not only in the email, and use your customer’s deadlines where they are stricter.

What happens after you send it

  1. The supplier confirms containment and answers with an 8D report. Every SCAR from this template links the supplier to the free 8D report template.
  2. You review the 8D: are both root causes (occurrence and non-detection) found and verified? Is effectiveness proven with data? See the 8D guide for what to look for.
  3. You close the SCAR, or send it back with questions.
  4. The non-conformance and the quality of the response feed into the supplier evaluation: late closure and incomplete 8D reports lower the supplier’s score.

AS/EN 9100 expects corrective action requirements to be flowed down to the supplier when the supplier is responsible for a non-conformance; a documented SCAR is the record of that.

SCAR, NCR and 8D: the difference

Document Who writes it Purpose
NCR (non-conformance report) You Record what is wrong and how the affected parts are dispositioned
SCAR (corrective action request) You, to the supplier Request containment and corrective action from the supplier
8D report The supplier Answer: root cause, corrective actions, proof of effectiveness

FAQ

What does SCAR stand for?

Supplier corrective action request (sometimes supplier corrective action report). It is the formal request to a supplier to investigate and correct a non-conformance.

Is a SCAR required by ISO 9001?

ISO 9001 requires you to control externally provided products and to take corrective action on non-conformities. A SCAR is a common way to document that you required the supplier to act. AS/EN 9100 is more explicit about flowing corrective action requirements down to suppliers.

Can I track SCARs and supplier responses?

The PDF is a one-off document. In Suppliscore, a SCAR becomes a non-conformance on the supplier’s record, with deadlines, the 8D response and the effect on the supplier’s evaluation.