Free template
Supplier audit checklist: questions, evidence and scoring
Supplier audit checklist with 45 questions in 10 areas, what to look for on site, a simple scoring scheme and the extra points for AS/EN 9100 suppliers.
Supplier audit checklist
All 45 questions from this page with the evidence to see, scored 2 / 1 / 0 / n/a. The result per area and in total is calculated.
No signup requiredThis supplier audit checklist covers what you need to see at a supplier’s site to judge whether their quality system works in practice, not just on paper. It has 45 questions in ten areas, each with the evidence to ask for, a simple scoring scheme and additional questions for aerospace (AS/EN 9100) suppliers. Use it for initial approval audits and for audits after quality problems.
How to use the checklist
- Prepare: read the supplier’s certificates, the last evaluation and open non-conformances. Pick the areas that matter for what they supply; a stockholder does not need the special-process questions.
- Ask for evidence, not answers. “Show me the last calibration record of this gauge” tells you more than “Do you calibrate your gauges?”
- Follow one order through the process: from order review to shipping. It tests most areas in one go.
- Score each question: 2 = fulfilled with evidence, 1 = partly fulfilled or evidence incomplete, 0 = not fulfilled, n/a = not applicable. Audit result in % = points achieved / points possible.
| Result | Rating | Typical consequence |
|---|---|---|
| ≥ 90 % | Approved | No conditions |
| 75–89 % | Approved with actions | Action plan for findings, check at next audit |
| ≤ 74 % | Not approved / conditional | Corrective actions before (further) orders |
The audit result feeds the “supplier audit result” criterion of the supplier evaluation.
The checklist
1. Management system and organisation
- Is the certificate (ISO 9001, AS/EN 9100) valid and does its scope cover the products you buy? Evidence: certificate, scope.
- Are quality objectives defined and monitored? Evidence: KPI chart with targets.
- Is there a named person responsible for quality with sufficient authority? Evidence: organisation chart.
- Were the findings of the last certification and customer audits closed? Evidence: audit reports, action lists.
2. Contract and requirements review
- Are customer requirements (drawing, specification, quality requirements) reviewed before order acceptance? Evidence: reviewed order.
- Are drawing revisions controlled so production uses the current revision? Evidence: drawing at the workplace vs. order.
- Are special customer requirements (e.g. certificates, test reports, packaging) communicated to production? Evidence: traveller, work order.
3. Purchasing and sub-suppliers
- Does the supplier evaluate and approve its own suppliers? Evidence: approved supplier list, evaluations.
- Are your requirements flowed down to sub-suppliers where relevant? Evidence: purchase order to a sub-supplier.
- Is incoming material inspected or verified against certificates? Evidence: incoming inspection records.
- Are outsourced processes (heat treatment, coating) controlled? Evidence: approvals, certificates of the subcontractor.
4. Production and process control
- Are work instructions available at the workplace and current? Evidence: instruction at the machine.
- Are process parameters defined and recorded where they matter? Evidence: parameter sheet, records.
- Is a first-piece inspection performed after set-up? Evidence: first-piece record.
- Are machines maintained according to a plan? Evidence: maintenance plan, records.
- Are critical characteristics identified and controlled with more care? Evidence: control plan, SPC charts.
5. Special processes
- Are special processes (welding, heat treatment, coating, NDT) qualified? Evidence: process qualification.
- Are operators of special processes qualified and are qualifications current? Evidence: qualification records.
- Are special process parameters monitored and recorded per batch? Evidence: batch records, furnace charts.
6. Inspection and testing
- Is there an inspection plan for the product? Evidence: inspection plan, control plan.
- Are in-process and final inspections recorded? Evidence: inspection records for a recent batch.
- Are inspection results traceable to the batch and the inspector? Evidence: records with batch and signature.
- Are test reports and certificates for the customer complete and correct? Evidence: a recent delivery’s documents.
7. Measuring equipment
- Is all measuring equipment registered and calibrated? Evidence: gauge list with calibration dates.
- Is calibration traceable to national or international standards? Evidence: calibration certificates.
- Is there a check for equipment found out of tolerance (impact on products already measured)? Evidence: procedure, example.
- Are measuring systems suitable for the tolerances (e.g. MSA/gauge R&R where required)? Evidence: study.
8. Nonconforming product and corrective action
- Are nonconforming parts identified and segregated? Evidence: blocked area, tags.
- Is the disposition of nonconforming parts decided and recorded? Evidence: NCR records.
- Are root causes analysed for significant problems (e.g. 8D)? Evidence: recent 8D report.
- Is the effectiveness of corrective actions verified? Evidence: closed 8D with validation data.
- Were your last complaints answered on time and with complete 8D reports? Evidence: your complaint log.
9. Identification, traceability, storage
- Are products identified throughout production? Evidence: labels, travellers.
- Can a finished part be traced back to material batch, machine and date? Evidence: trace a part from a recent delivery.
- Are storage conditions suitable (protection from damage, corrosion, mix-up)? Evidence: warehouse walk.
- Is packaging defined and suitable for transport? Evidence: packaging specification.
- Is FIFO or shelf-life control applied where relevant? Evidence: stock records.
10. Competence and improvement
- Are training needs defined and training recorded? Evidence: training matrix.
- Are employees aware of the quality requirements of their work? Evidence: ask an operator.
- Is there a continuous improvement process with measurable results? Evidence: improvement list.
Additional questions for AS/EN 9100 suppliers
- Is first article inspection (FAI, e.g. per AS/EN 9102) performed for new parts and changes? Evidence: FAI report.
- Is there a process to prevent counterfeit parts? Evidence: procedure, approved sources for electronic parts.
- Is foreign object damage/debris (FOD) prevention in place where relevant? Evidence: FOD procedure, workplace.
- Are key characteristics and their control defined? Evidence: control plan.
- Are employees aware of product safety and ethical behaviour? Evidence: training, awareness material.
How to use the checklist: let the process owner lead
The best supplier audits do not work down a list of questions. Ask the person responsible for a process to walk you through it, and follow the material and the information. Take incoming goods as an example:
- What happens when material arrives? Who does the incoming inspection, what do they check, and who is informed?
- Where is the result recorded, where is the material stored, and who marks it?
- How do you know which material certificate belongs to which material, and that the material meets the requirements?
- Who specifies the material requirements, who checks them, and how do you know the right material is used on the right project?
- What has to be done per project, who specifies it, where is it written, and how do you know it was done?
Along the way, watch the points where information has to pass between departments: it has to be recorded, stored and shared; inspections and hold points have to be defined; releases have to be evident. Once the process owner has told you how they do their job, ask to see the evidence. No process is perfect; the audit shows you where the risks are, because quality assurance is about minimising them.
After the audit
- Write the report within a few days: score, findings per area, strengths.
- Agree on corrective actions with dates for each finding.
- Update the supplier’s status on the approved supplier list and the audit criterion in the evaluation.
- Verify the actions, by document review or at the next audit.
FAQ
How long does a supplier audit take?
For a small supplier with one site, half a day to a day. Plan more for special processes or several product lines.
Can a supplier audit be done remotely?
Document review and interviews, yes. Process observation, storage and traceability checks work much better on site; use remote audits for re-audits of known suppliers.
Do I need to audit every supplier?
No. Audit new suppliers of critical products or processes, and existing suppliers after serious quality problems. For low-risk suppliers, the certificate and the performance data are usually enough.